800-636-2329 | Search | Site Map

FEY Laminar Rings > Sealing Rings


FK6 Double Wound Sealing Rings

FK 6 Laminar Rings are double wound. They serve as a grease seal for plain and roller bearings and are also used as a protective seal in front of radial lip seals. Higher sealing performance is achieved by the FK 6 Laminar Rings when exuding grease. They also provide better protection against dust, dirt and splash water. FK 6 Laminar Rings are outstanding for their high retention force and have no joint gap. The combined ASKD or ISKD ring sets optimize the sealing as a result of the increased labyrinth effect.

Due to easier fitting in the grooves the ISD or ISKD arrangement is preferred over the ASD or ASKD arrangement where this is possible. The ring carriers can be manufactured from steel, cast iron or plastic.

ASD
Outside Clamping Double Rings
(1 set = 2 individual rings)

No speed limit for housing or ring carrier

ASKD
Outside Clamping Double Rings Combination
(1 set = 3 individual rings)

No speed limit for housing
Speed limit for ring carrier: max 10 m/s

ISD
Inside Clamping Double Rings
(1 set = 2 individual rings)

No speed limit for housing
Speed limit for shaft: max 10 m/s

ISKD
Inside Clamping Double Rings Combination
(1 set = 3 individual rings)

No limit for housing
Speed limit for shaft: max 10 m/s

 
Run and Installation Tests
Run and installation tests, under operating conditions, must be performed in each case before standard production of our laminar rings can begin to determine whether the desired effects can be achieved.
New Application
If you are interested in having Fey rings specifically designed for your application, please fill out and submit our questionnaire.
Current Application
If you have questions about using our product in your application, please contact us and we will be happy to assist you.

 

 

   

© Copyright 2015 - OEM International, Inc.

Website By Manna Design Works

Manna Design Works, A New Jersey Web Design Company.