Rotary Shaft Oil Seals are available up to 48" (1219.2mm) outside diameter in a variety of styles to include the following elements:

VITON, NITRILE, LEATHER, SILICONE, FELT, EPDM, VIRGIN PTFE, FILLED PTFE, FOOD GRADE,

These products can be manufactured in Mild Steel, Brass, Stainless Steel and Aluminium. The production range can be: single lip, semi-dual, dual, wiper seals in single, double or triple lips and pressure seals to withstand up to 25 bar pressure.

For when duplicate lips are requried with a small width. The washer prevents dirt from damaging the main lip.

The most popular spun design. A spring loaded lip in a steel casing.

Here the spring loaded lip is preceded by a washer.

This design is for when axial and radial dimensions are restricted.

This tripple lipped seal is great grease and thick oils.

For limited space requiring dual sealing.

Dual lips designed for applications of a more critical nature.

This design showing both lips facing each other allows a liberal quantity of grease to be prepacked before assembly. This is most suitable when an automatic grease feed is not possible.

Two sealing elements with opposed lips. One to exclude dust and debris and the other to retain lubricant.

This design features a lug between the seals that allows grease to be administered to the center cavity after the seal is installed.